Impact of carbon/nitrogen feeding strategy on polyhydroxyalkanoates production using mixed microbial cultures

Polyhydroxyalkanoates (PHA) production using mixed microbial cultures (MMC) requires a multi-stage process involving the microbial selection of PHA-storing microorganisms, typically operated in sequencing batch reactors (SBR), and an accumulation reactor. Since low-cost renewable feedstocks used as process feedstock are often nitrogen-deficient, nutrient supply in the selection stage is required to allow for microbial growth. In this context, the possibility to uncouple nitrogen supply from carbon feeding within the SBR cycle has been investigated in this study. Moreover, three different COD:N ratios (100:3.79, 100:3.03 and 100:2.43) were tested in three different runs which also allowed the study of COD:N ratio on the SBR performance. For each run, a synthetic mixture of acetic and propionic acids at an overall organic load rate of 8.5 gCOD L-1 d-1 was used as carbon feedstock, whereas ammonium sulfate was the nitrogen source in a lab-scale sequence batch reactor (SBR) with 1 L of working volume. Besides, a sludge retention time (SRT) of 1 d was used as well as a 6 h cycle length. The uncoupled feeding strategy significantly enhanced the selective pressure towards PHA-storing microorganisms, resulting in a two-fold increase in the PHA production (up to about 1.3 gCOD L-1). A high storage response was observed for the two runs with the COD:N ratios (gCOD:gN) of 100:3.79 and 100:3.03, whereas the lowest investigated nitrogen load resulted in very poor performance in terms of polymer production. In fact, strong nitrogen limitation caused fungi to grow and a very poor storage ability by microorganisms that thrived in those conditions. The COD:N ratio also affected the polymer composition, indeed the produced poly(3-hydroxybutyrate-co-3-hydroxyvalerate) (PHBV) showed a variable HV content (1-20 %, w/w) among the three runs, lessening as the COD:N increased. This clearly suggests the possibility to use the COD:N ratio as a tool for tuning polymer properties regardless the composition of the feedstock.

Logoplaste: Conquering the world one bottle at a time

The “Logoplaste: Conquering the world one bottle at a time” case is based on the real story of the Botton family and their journey to build the globally known company Logoplaste. Famous for its “hole in the wall” strategy within the plastics industry, Logoplaste is not only one of the major plastic bottles manufacturers in the world, but also a company which has been proving us that a shared leadership system can be successful within a family business. This case intendeds to demonstrate the dynamics of a family business, illustrating the complexity of the decision making process and how they have successfully mastered dual management in a family firm. Moreover, it also aims to demonstrate that a family firm can be managed in such way that sustainable growth, as a key pillar, can be enabled through a strong focus on internationalization and innovation. A teaching note is available at the end of the case in order to guide students and teachers in their readings. Discussions questions, for debate in class environment, are also provided together with suggested answers drawn together to increase the critical sense and theoretical application of the themes studied in class.